Features

• Heavy duty tubular radius arms improve strength, offer more ground clearance and correct caster
• High strength progressive rate front coil springs for a great ride on any terrain
• HD adjustable front track bar and rear relocation bracket to correctly position both axles under the truck
• F/R sway bar links and bump stop extensions to maintain functionality.
• BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
• Allows clearance for 35" tires

Up front these systems use a pair of (diesel specific) progressive rate 3" coil springs to provide the extra height and offer controlled performance in the harshest of terrains. A high strength adjustable track bar with center pinch-bolt turnbuckle is supplied to re-center the front axle. A pair of extended length sway bar links correct the OEsway bar operating angle for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

In the rear of the RAM 2500 kits a pair of 1.25" steel fabricated coil spacers are used to level out the stance and maintain load capacity. Extended length sway bar links correct sway bar operating angle for optimal performance and a longer rear bump stop correctly limit compression travel. The rear axle is recentered under the vehicle with the use of a heavy duty axle mounted relocation bracket. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks. As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 3" radius arm systems from BDS Suspension.

WHEEL/TIRE Fitment

• 35x12.50 tires on 17x9/18x9/20x9  wheels with 4.5-5" BS

Important Install Notes

1. Will not fit rear air-ride equipped models
2. Will not fit Power Wagon models
3. Kit designed for diesel models only