Features

• Heavy duty tubular radius arms improve strength, offer more ground clearance and correct caster
• F/R high strength progressive rate coil springs for a great ride on any terrain
• F/R HD track bar relocation brackets to correctly position both axles under the truck
• Forged drop pitman arm to correct steering angles
• F/R sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles
• BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
• Allows clearance for up to 37" tires

Up front these systems use a pair of (diesel specific) progressive rate 4" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy duty replacement radius arms that bolt directly into the factory location. These new radius arms are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 4" of lift it is critical to correct the front driveline angle to maintain use of the 4WD. To do this BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear of the RAM 2500 kits 2.5" progressive rate coil springs are supplied to level out the stance and improve capability across all terrains without affecting load capacity. Extended rear sway bar end links and new bump stops are included to compensate for the lift along with a track bar bracket to re-center the rear axle. Finishing out the rear are a matching set of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks. As with all BDS Suspension kits these include Factory Protection Plus for a limited lifetime warranty, ESC System compatibility, and 5-year, 100,000-mile drivetrain warranty. Get the look and the ride you are after with these new 4" radius arm systems from BDS Suspension.

WHEEL/TIRE Fitment

• 37x12.50 Tires on 17x9/18x9/20x9 Wheels (5.625" BS)
• 35x12.50 Tires on 17x9/18x9/20x9 Wheels (4.5" BS)

Important Install Notes

1. T-case indexing ring designed for vehicles with 6-bolt design only, will not fit trucks with 8-bolt.
2. Will not fit rear air-ride equipped models
3. Will not fit Power Wagon models
4. Kit designed for diesel models only