Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 2009-2013 6" lift Ford F150 suspension system featuring Fox 2.5" coil-over remote reservoir shocks. This system has been rigorously tested to maximize travel and performance on and off the pavement. This 2009-2013 Ford F150 4x4 6" lift system utilizes BDS proven design standards including one-piece front & rear crossmembers coupled with precision machined ductile cast iron steering knuckles. The steering knuckles are designed to work within the factory traction control constraints and provide stock-like handling characteristics. The knuckles are also considerably more robust in both the mass and strength categories over the rather light-duty stock components.

The BDS Ford F150 High Clearance lift crossmembers are built from 1/4" laser cut steel and maximize ground clearance and strength. The relocated differential is protected by a skid plate tying the crossmemember together. The system also includes a front driveshaft spacer and sway bar drop brackets to correct the sway bar link geometry. The rear of the BDS F150 4x4 6" lift kit comes all the components necessary to level the truck and center the axle in the wheel well. This includes a dual pin 5" block, offset spring plates, u-bolts and brake line relocation brackets. BDS by Fox 2.0 series rear shocks come standard in this system.

Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to the correct ride height for an easy installation, but can also be fined tuned to your liking.

Important Kit Notes

1. Strut compressor required for installation.
2. Requires frame bracket modification and welding.
3. 18" wheels with 5-5.5" total backspacing should be test fir prior to mounting tire to ensure proper clearance to BDS steering knuckle.
4. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.
5. E-brake bracket required for factory powersteps (123018) Block kits replace factory 1-1/4" block.
6. For a level to tail low appearance use #023415 with Kit#598H or use #013429 with Kit#573H.
7. Models with a 2-piece rear driveshaft may require carrier bearing drop shim kit #123402
8. Will fit EcoBoost models.
9. Models equipped with AWD/ Auto 4wd may require front driveshaft replacement.
10. This kit is FMVSS No.126 Compliant

Recommended Wheel & Tire:

• 35" x 12.50" w/ 18" x 9" Wide and 5.0" Backspacing
• 37" x 12.50" w/ 18" x 9" Wide and 5.0" Backspacing
• 37" x 12.50" w/ 20" x 9" Wide and 5.0" - 5.5" Backspacing