BDS Suspension
BDS 4" Lift 4 Link Suspension Fox Coilover 2011-2016 Ford F250/F350 4x4
- Contact us for pricing and availability
- SKU:
- 590F
Description
Hide Reviews Show ReviewsOverview:
BDS Suspension 4" Suspension Lift Kit for 2011-2016 Ford F250/F350 Superduty 4x4 pickup trucks. This kit centered around two Pro-Ride Coil Springs. The box kit includes two new radius arm drop brackets to put the stock radius arm back at factory angle which will maintain your stock driving characteristics.
The kit also comes with anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle and bump stop extension. The rear is lifted via a 5" block kit and eliminates the factory block. Choose between gas and diesel configurations as well as plenty of upgrades and acessories when customizing your kit.
Features:
|
Important Kit Notes:
1. Removal of factory block required. Net rear lift height will vary depending on height of factory block, but will result in a level stance.
2. Front exhaust modification may be required to clear front drive shaft (gas only).
3. If equipped with 2-piece driveshaft, a driveshaft alignment kit may be required.
4. Although extremely rare, front driveline vibration may occur.
5. If equipped with rear sway bar, #123009 required.
6. U-bolts will not work on dually.
Vehicle Application / Fitment:
- 2011 Ford F250 / F350 Superduty 4x4
- 2012 Ford F250 / F350 Superduty 4x4
- 2013 Ford F250 / F350 Superduty 4x4
- 2014 Ford F250 / F350 Superduty 4x4
- 2015 Ford F250 / F350 Superduty 4x4
- 2016 Ford F250 / F350 Superduty 4x4
Recommended Wheel & Tire:
- 35" x 12.50 w/17" and 4.5" back spacing
Fitment
Hide Reviews Show Reviews- 2011-2016 Ford F250 / F350
- Drivetrain:
- 4wd
This Part Fits:
Details
Hide Reviews Show ReviewsWarranty Information
Hide Reviews Show ReviewsBDS SUSPENSION'S NO-FINE-PRINT WARRANTY
This unique warranty proves our commitment to the quality and reliability of every product we make.The No Fine Print warranty does not include shock and stabilizer cylinders.
No Fine Print Warranty
If you are the original purchaser of any BDS product and it breaks, we will give you a new part. Period.
Shock and Stabilizer Cylinders Limited Lifetime Warranty
BDS Suspension Co. warrants to the original retail purchaser that its shock and stabilizer cylinders are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product and mounting bushings. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust, worn or deformed bushings. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.
Shock oil seals are subject to wear over time, and use. Therefore are not covered under warranty. However leaking shock seals less than one year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty.
BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. Any cost of removal, installation or reinstallation, freight charges, incidental or consequential damages are expressly excluded from these warranties.
Factory Protection Plus 560PLUS
The Ultimate Lifted Suspension Protection Coverage and it's FREE!
- Supplemental Drivetrain Limited Protection provided by 560Plus.com - 5 Year/60,000 Miles on Ford, Nissan and Toyota vehicles and 5 Year/100,000 Miles on Dodge/Ram, GM and Jeep vehicles.
- Free, no cost protection for BDS customers
- Could save thousands of dollars on possible repairs
- Easy online registration process
- Available for most late model vehicles
What is Factory Protection Plus? Click to find out now.