BDS Suspension
BDS 2.5" Lift Fox Coilover Radius Arm Suspension 2011-2016 Ford F250/F350 4x4
- Contact us for pricing and availability
- SKU:
- 1509F
Description
Hide Reviews Show ReviewsOverview:
These systems convert the standard front coil springs over to FOX 2.5 remote reservoir coilovers for vastly improved dampening capability and performance across any terrain. The kit includes new coilover mounts that bolt into the factory coil buckets for easy installation and allow the addition of an auxiliary FOX 2.0 shock in the stock location. Heavy duty replacement radius arms are also included in these kits. The radius arms are built from 1.75" OD heavy wall tubing and bolt right in place of the factory stamped steel radius arms for improved strength and correct axle positioning with the lift installed. These paired with the heavy adjustable track to recenter the front axle, and sway bar relocation brackets. In the rear the kit uses a 4" replacement lift block to net a level stance with room for 35" tires.
Features:
|
Important Kit Notes:
1. For F250 Diesel models w/o top mounted overload rear springs.
2. Front portion of the kit can be installed on an F-350 model, which uses a taller 3-7/8" rear block from the factory, in order to level the front with the rear.
Vehicle Application / Fitment:
- 2011 Ford F250 / F350 Superduty 4x4 Diesel
- 2012 Ford F250 / F350 Superduty 4x4 Diesel
- 2013 Ford F250 / F350 Superduty 4x4 Diesel
- 2014 Ford F250 / F350 Superduty 4x4 Diesel
- 2015 Ford F250 / F350 Superduty 4x4 Diesel
- 2016 Ford F250 / F350 Superduty 4x4 Diesel
Recommended Wheel & Tire:
- 35" x 12.50 w/17" and 5" back spacing
Fitment
Hide Reviews Show Reviews- 2011-2016 Ford F250 / F350
- Drivetrain:
- 4wd
This Part Fits:
Details
Hide Reviews Show ReviewsWarranty Information
Hide Reviews Show ReviewsBDS SUSPENSION'S NO-FINE-PRINT WARRANTY
This unique warranty proves our commitment to the quality and reliability of every product we make.The No Fine Print warranty does not include shock and stabilizer cylinders.
No Fine Print Warranty
If you are the original purchaser of any BDS product and it breaks, we will give you a new part. Period.
Shock and Stabilizer Cylinders Limited Lifetime Warranty
BDS Suspension Co. warrants to the original retail purchaser that its shock and stabilizer cylinders are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product and mounting bushings. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust, worn or deformed bushings. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.
Shock oil seals are subject to wear over time, and use. Therefore are not covered under warranty. However leaking shock seals less than one year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty.
BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. Any cost of removal, installation or reinstallation, freight charges, incidental or consequential damages are expressly excluded from these warranties.
Factory Protection Plus 560PLUS
The Ultimate Lifted Suspension Protection Coverage and it's FREE!
- Supplemental Drivetrain Limited Protection provided by 560Plus.com - 5 Year/60,000 Miles on Ford, Nissan and Toyota vehicles and 5 Year/100,000 Miles on Dodge/Ram, GM and Jeep vehicles.
- Free, no cost protection for BDS customers
- Could save thousands of dollars on possible repairs
- Easy online registration process
- Available for most late model vehicles
What is Factory Protection Plus? Click to find out now.