8-10" Lift Kit Stage 1 System (Full Leaf Spring) 11-19 GM HD 2500 / 3500

The 2011-2018 Chevy Silverado / GMC Sierra 2500HD 6-8" Lift by CST Suspension will not disappoint. The 2011-2018 Silverado / Sierra 2500HD 6-8" lift provides the leveled look without compromising the ride quality or function. CST Suspension engineers their suspension to provide increased strength, performance, overall ride quality, and allow your truck to perform better than stock with many upgrades.

The standard 8-10" adjustable kit for the front end includes our one-piece gusseted sub-frame with a steel full size differential skid plate, fabricated steel, CNC machined front steering knuckles, high strength steering drop center-link with heim jointed support links to minimize wear of the factory idler and pitman arms, differential drop brackets, heavy duty bump stop brackets, extended sway bar end links, brake lines & drop brackets, CST laser cut torsion x-member drop brackets, all necessary hardware, and O.E. front shock extensions. This kit will also include a progressive rate soft ride full leaf spring pack.

Steering stabilizer brackets are built into the kit and our stabilizer shock kit can be purchased as an upgrade option.
No cutting of the front differential is required or welding of any kind. The CST 6-8" lift kit retains the factory front wheel track width and has zero compatibility issues with the GM Stabilitrak system.

Features:

• 8-10" Adjustable Lift Height (Level Stance at 8" Lift)
• Superior CV and Tie-Rod Angles
• New Center Link with Heim Supports Reduce Wear
• Overall Track Width Remains Factory
• Ability to re-use Front O.E. Shocks (Kit Includes Shock Extensions)
• NO GM Stabilitrak Issues
• High Quality Gloss Black Powder Coat Finish
• NO Welding Required
• Fabricated Steel Spindles
• Made In The U.S.A.

Install Notes:

• Torsion Keys Required for 9-10 Inches of Lift
• Additional Rear Lift Required for Level Stance when Keys are Added
• 3500 Models May Require Longer Rear U-Bolts
• May Require Carrier Bearing Drop
• Front Driveshaft Recommended for 11-14 Models and Required on 15+ Models

Suggested Wheel/Tire Sizes:
Wheel Sizes:
17 x 8" or 9" w/ 5 1/4" BS
18 x 9" w/ 5 1/4" BS
20 x 9" or 10" w/ 5 3/4" BS Tire Sizes:
37" x 12.5"
38" x 13.5" (Minor Trimming Required @ 10" Lift Height)

Included Parts:

• CSS-C3-16-B1 (x1) SUBFRAME, SKID PLATE, CENTERLINK
• CSS-C3-16-B2 (x1) SPINDLES, DIFF DROP, TORSION SIDEPLATES
• CSS-C3-16-B3 (x1) BUMPSTOPS, TORSION DROPS, BRAKELINES
• CSL-19-5 (x1) 6" LEAF PACK
• CSB-C14-7 (x1) 1" LIFT BLOCK W/U-BOLT PLATES
• CSU-C15-13HD (x1) 11" U-BOLT KIT 3/4x3.25x11 SQUARE