5.5" Lift Cast Spindle Stage 1 System 13-18 Ram 1500 2wd

IT’S BEEN ALMOST 40 YEARS SINCE ANY TRUCK MANUFACTURER HAS USED COIL SPRINGS FOR THEIR REAR SUSPENSION, BUT WITH THE DEBUT OF THE NEW BODY STYLE RAM 1500 IN 2009 WE GOT EXACTLY THAT. A BOLD NEWLY STYLED HALF TON 2WD WITH AN ENTIRELY DIFFERENT REAR SUSPENSION THAT PROVIDES AN IMPROVED RIDE WHILE MAINTAINING A STRONG LOAD RATING, TWO THINGS DODGE TRUCK OWNERS EVERYWHERE COULDNT BE HAPPIER ABOUT!

WITH THIS IN MIND WE SET OUT TO OFFER OUR CUSTOMERS SUSPENSION LIFT OPTIONS THAT WOULD PROVIDE INCREASED GROUND & TIRE CLEARANCE WHILE MAINTAINING? THE STOCK RIDE, HANDLING & LOAD RATING! FIRST WE PROVIDE 4" OF LIFT USING OUR CAST-IRON LIFT SPINDLES THEN ADD LIFT COILS TO GET TO A TOTAL OF 5.5" OF FRONT LIFT. IN ADDITION TO THE FRONT SPINDLES AND COILS YOU MUST RUN THE CST STEEL BRAIDED BRAKE LINES (PART# CSS-D11-1) INCLUDED IN THIS KIT. FOR THE REAR OF THE TRUCK THIS CST KIT (PART# CSK-D1-5-1) USES 4" FABRICATED SPACERS AND A FABRICATED PAN-HARD BAR DROP, KEEPING THE FACTORY REAR LOAD RATING & RIDE QUALITY.

• INCREASED GROUND & TIRE CLEARANCE.
• THE ONLY AMERICAN MADE, CAST-IRON LIFT SPINDLES AVAILABLE IN THE INDUSTRY.
• NO WELDING REQUIRED.
• ABILITY TO RETURN TRUCK TO STOCK.
• MAINTAINS FACTORY LOAD RATING & REAR COIL RATE.
• LEVEL STANCE ON MOST TRUCKS. (REAR KIT AVAILABLE IN 1 OR 1.5")
• STEEL BRAIDED, DOT APPROVED FRONT BRAKE LINES.
• DESIGNED TO FIT 35" TIRES W/ 9-10" WIDE WHEELS.
• ALL PARTS MADE IN THE USA!

INSTALL NOTES

• THE FRONT COIL SPRINGS IN THIS KIT WORK BEST WITH HEMI APPLICATIONS ON THE 2013-2018 RAM 1500 2WD. DO NOT COMBINE THESE FRONT SPRINGS WITH ANY SPACERS.
• 17" WHEELS CAN NOT HAVE MORE THAN A 4.75" BACKSPACING.
• NOT FOR USE WITH 1500 MEGA CAB!
• THIS KIT IS APPROVED FOR THE 2013-2018 RAM 1500 2WD CREW CAB WITH A HEMI ENGINE, V6 OR ECO-DIESEL. LIFT HEIGHT MAY VARY ON SMALLER CAB & ENGINE SIZES.

SUGGESTED WHEEL & TIRE SIZES

• 33x12.5” OR SIMILAR ON 9-10” WIDE WHEELS
• 315 / 70 / 17 ON 8-10” WIDE WHEELS
• 35” X12.5” ON 9 OR 10” WIDE WHEELS (MINOR TRIMMING REQUIRED)
• ANYTHING LARGER, TALLER OR WIDER IS BEYOND CST RECOMMENDATIONS AND UP TO THE INSTALLER.
• MAXIMUM BACKSPACING / 17" WHEELS IS? 4.75" / 18" OR LARGER IS 5"

INCLUDED PARTS:

• CSS-D1-5 (x1) 4" CAST LIFT SPINDLE KIT
• CSC-D3-3 (x1) 1.5" FRONT LIFT COILS
• CSS-D11-1 (x1) FRONT EXTENDED BRAKELINES
• CSS-D16-1 (x1) 2WD 4" REAR KIT