click to zoom in
BDS Suspension
4" Lift Suspension 13-18 Ram 3500 4wd Diesel
(No reviews yet)
Write a Review
- Contact us for pricing and availability
- SKU:
- 696H
Have questions?
Ask the Experts
Description
Hide Reviews Show ReviewsThe 2013-2018 RAM 3500 4wd Diesel is an all new re-desgined suspension system for the 2013-2015 Ram 3500's. The radius arms on the 2013 RAM 3500 1 ton are a newly designed bracket that mixes the ease of installation you get with an adapter-type bracket with the strength and durability of a full replacement radius arm mount bracket. BDS has designed the 2013 RAM 3500 4wd 4" lift system with a new relocation bracket that ties into both the factory radius arm frame mount and the side of the frame rail. There is a minor amount of welding required for this new 4" lift suspension system. BDS has designed this portion of the 2013 RAM 3500 4wd lift kit installation so it can be completed without welding and then transported to a weld shop to be welded if necessary.
This BDS 4" lift kit includes everything else to properly lift the 2013-2018 Ram 3500 4wd diesel truck. Track bar relocation, dropped pitman arm and brake line relocation hardware position all the steering and brake components properly to work with the added ride height provided by the new progressive rate, full replacement coils springs. BDS has extra design time involved in developing coils that would ride great, handle the rigors of supporting a 1 ton truck and work properly with the unique factory coil mounts at the frame and axle. For BDS to build a 2013 Ram 3500 truck with the best ride possible they had to make side specific coil springs. The 2013-2016 Dodge Ram 3500 4wd trucks have a traditional rear leaf spring setup that gets lifted with a block and u-bolt setup providing a level stance. Dodge stuck with the leaf springs for the 1 ton due to the higher payload capacities.
- 4" Overall Lift
- Optional Fox Shock Upgrade
- High Quality Black Powdercoat Finish
- All Required Components Included
- Custom Tuned Coil Springs
- Heavy Duty Steel Brackets
Important Kit Notes
1. For rear leaf spring equipped models only.
2. The carrier bearing drop kit (122405) is necessary for models equipped with two piece rear drive shaft.
3. Will not fit Cab and Chassis models
4. Not for use with factory rear airbag suspensions
Recommended Wheel & Tire:
37x12.50 w/ 17" x 9" Wide and 5.625" Backspacing
35x12.50 w/ 18" x 9" Wide and 4.5" Backspacing
35x12.50 w/ 20" x 9" Wide and 4.5" Backspacing
Fitment
Hide Reviews Show Reviews- 2013-2018 Dodge / Ram 3500
- Drivetrain:
- 4wd
This Part Fits:
Details
Hide Reviews Show Reviews- Lift Height:
- 4 Inch
- Type:
- Suspension Lift Kit
- Sold As:
- Kit
- Position:
- Front & Rear
- Engine Type:
- Diesel
Warranty Information
Hide Reviews Show ReviewsBDS SUSPENSION'S NO-FINE-PRINT WARRANTY
This unique warranty proves our commitment to the quality and reliability of every product we make.The No Fine Print warranty does not include shock and stabilizer cylinders.
No Fine Print Warranty 
If you are the original purchaser of any BDS product and it breaks, we will give you a new part. Period.
Shock and Stabilizer Cylinders Limited Lifetime Warranty
BDS Suspension Co. warrants to the original retail purchaser that its shock and stabilizer cylinders are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product and mounting bushings. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust, worn or deformed bushings. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.
Shock oil seals are subject to wear over time, and use. Therefore are not covered under warranty. However leaking shock seals less than one year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty.
BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. Any cost of removal, installation or reinstallation, freight charges, incidental or consequential damages are expressly excluded from these warranties.
Factory Protection Plus 560PLUS
The Ultimate Lifted Suspension Protection Coverage and it's FREE!
- Supplemental Drivetrain Limited Protection provided by 560Plus.com - 5 Year/60,000 Miles on Ford, Nissan and Toyota vehicles and 5 Year/100,000 Miles on Dodge/Ram, GM and Jeep vehicles.
- Free, no cost protection for BDS customers
- Could save thousands of dollars on possible repairs
- Easy online registration process
- Available for most late model vehicles
What is Factory Protection Plus? Click to find out now.
