This complete 2007-2015 Toyota Tundra 4.5" IFS w/ strut mount lift kit system is not only built for daily driving, but will handle about any off road excursion you can think of. At the core of these 4.5" and 7" lift systems are a pair of laser cut 1/4" steel high clearance crossmembers and a full width belly skid plate designed to reposition the lower arms and add protection of vital drivetrain components. These combined with the CNC machined ductile iron replacement steering knuckles create a solid subframe and to correct suspension and steering geometry to be compatible with the factory installed ESC system. Up front the kits use a multipoint differential relocation kit to securely reposition the front differential to correct CV axle angles and allow for the use of the stock front driveshaft. Also included for the front are heavy duty tie rod ends, longer sway bar links, weld-in support plates, cam bolts, and brake line brackets. A lower strut extension is used to provide the extra ride height while maintaining factory ride quality. In the rear these kits are offered with a rear cast iron block and u-bolt kit to level the stance. Also included are rear brake line extensions and your choice of rear BDS-5500 series hydraulic or Fox 2.0 IFP performance gas shocks. The 4.5" system is designed to fit up to 35" tires.

• 4.5" Overall Lift
• Optional Rear Fox Shock Upgrade
• High Quality Black Powdercoat Finish
• All Required Components Included
• Front Strut Spacers For Factory Ride
• Heavy Duty Steel Brackets
• NO Fine Print Lifetime Warranty

Important Kit Notes

1. Requires frame bracket modification and welding.
2. No strut dissassembly required.
3. Stock 18" wheels can not be installed. factory 20" wheels with more than 6.25" backspacing can not be installed.
4. Models with two piece rear drive line would require rear drive shaft modification.
5. When kit is installed on 2WD models, the differential brackets will not be used.
6. ***Will work with Bilstein (yellow) factory front struts on 2014-2015 models.***
7. Models equipped with 6 piston calipers require modification.
8. Will NOT work on TRD Pro Models.

Recommended Wheel & Tire:

35x12.50 w/ 18" x 9" Wide and 5.5" Backspacing
35x12.50 w/ 20" x 9" Wide and 5.5" - 6.25" Backspacing