2.5" Lift Stage 3 Suspension System (Air Ride) 19-20 Ram 2500 4wd

Features

• Increased wheel travel and ride quality over stock
• Decreased body roll
• Level stance from front to rear of vehicle
• ICON-engineered dual rate coil springs deliver exceptional vehicle control over varying terrain
• Vehicle-specific tuned front and rear shocks provide superior damping and control
• Shocks are fully rebuildable and revalveable
• Bolt-on design makes for a simple and straightforward install
• Performance systems provide improved on and off-road compliance and ride quality
• Air ride systems allow for full functionality of factory air ride modes

 ICON’s 2019-UP RAM 2500 2.5” suspension systems are available in stages that include varying combinations of shocks, springs, and additional components. The introductory Stage 1 system includes vehicle-specific ICON 2.5 remote reservoir shocks and is a great setup for street, towing, and light off-road use. Each stage provides 2.5” of lift height, which is adequate for the fitment of larger wheel and tire combinations up to 35". Each ICON 2019-UP RAM 2500 4WD 2.5” system is also available in a configuration that has been designed to work specifically for vehicles with a factory air ride setup. After a thorough inspection of the RAM’s air ride assembly, ICON developed components that properly locate the airbags and associated parts so they are not over-traveled and damaged. These systems allow for full functionality of factory air ride modes. Using the optional ICON 1" Air Ride Kit (Part #214212) allows end users to adjust the rear ride height from stock up to 1” of lift.

WHEEL & TIRE FITMENT

• OEM Wheels & Tires: Yes
• Aftermarket Wheels: 18" x 9", 5.50" backspace
• Aftermarket Tires: 35" x 12.50"

SYSTEM COMPONENT LIST

• 214200 x1 Front 2.5 inch Lift Dual Rate Spring Kit
• 214203 x1 Front Adjustable Track Bar Kit
• 217802P x1 2.5 Remote Reservoir Shocks 2.5 inch Lift Front
• 217708P x1 2.5 Piggyback Reservoir Shocks 0-3" Lift Rear

IMPORTANT INSTALL NOTES

• Lift heights based on crew cab diesel configurations
• May not be compatible with other manufacturers aftermarket track bars
• Air bags recommended with performance rear springs if vehicle is to be used for towing
• Vehicles equipped with 2-piece drive shafts may require carrier shim kit (Part #214213)
• Optional ICON 1" Air Ride Kit (Part #214212) allows end users to adjust the rear ride height from stock up to 1” of lift